Product Details
＋- Monocrystalline solar cells for higher energy conversion rates
- Compact folding design w/ kickstands for effortless setup and transport
- Long-lasting ETFE coating resistant to scratches, warping, and discoloration
- Equipped with MC4 connectors, compatible with most solar generators
- IP65 waterproof rating (protected from minor water exposure)
Things to Keep in Mind While Recharging:
- Recharging time varies due to location, temperature, weather, etc., and may take longer than estimated.
- When using the SP200 to recharge a portable power station, keep the power station away from heat and direct sunlight to extend its lifespan.
- When using SP200 panels in series or in parallel with one another, please note that their output power may be limited by the input power of connected power stations.
MORE POWER, MORE FUN
Equipped with SunPower monocrystalline silicon solar cells, the Vanpowers SP200 solar panel’s conversion efficiency is as high as 23%. With its ETFE film allowing for up to 95% light transmittance, it can absorb 40,000 lx in intense sunlight. It also performs better than polycrystalline solar panels in low-light conditions and much better than the market average overall. Built-in 45-degree kickstands let you keep your solar panels at the optimal angle to fully absorb that sunshine.
SCRATCH-, DUST-, & WATER-RESISTANT
The Vanpowers SP200 has IP65-rated dust and water resistance and won’t deform, fade, or get scratched, making it an ideal combo for outdoor activities like camping and hiking. ETFE film provides extra protection against ultraviolet light, prolonging the lifespan of the product. A double-zipper storage bag is included to help protect the panel, cable, and ports during travel.
FREE, GREEN, CLEAN ENERGY
We always strive to spread the word about utilizing a more powerful resource to generate electricity through Mother Nature—the Sun. Our SP200 is here to do the work. You can connect it in series or in parallel for more solar power when charging high-energy items like power stations, building the foundation of your off-grid power system with ease.
PREPARE YOUR SOLAR GENERATOR
Different power stations have different input voltage and current limits. Please use the appropriate power station according to the output parameters of the solar panel. The recommended power station for SP200 is SP1500/SP200 portable power station.
Wire Solar Panels In Series
Step 1. Snap the male connector of one solar panel into the female the connector of the other respectively to wire the three solar panels in series.
Step 2. Wire the two connectors that are unwired in step 1 with the Solar Charging Cable (MC4 to Anderson, DC5521, DC7909, and car charger cable) respectively.
Step 3. Connect the solar panels and the solar power cable with the power station input.
Note: The four different connection ports of MC4 to Anderson, DC5521, DC7909, and car charger cable are to adapt to different energy storage batteries, please choose different ports according to the battery you use, and only connect one of them at a time (Anderson/DC5521 /DC7909/car charger port).
Wire Solar Panels In Parallel
Step 1.Connect the positive poles of the two solar panels with the MC4 parallel cable and repeat the step for the negative poles.
Step 2. Connect the parallel cable connectors (output side) with the MC4 connectors of the Solar Charging Cable (MC4 to Anderson, DC5521, DC7909, and car charger cable) respectively.
Step 3. Connect the Solar Charging Cable(MC4 to Anderson, DC5521, DC7909, and car charger cable) to the input port on the portable power station to recharge the unit.
Note: The four different connection ports of MC4 to Anderson, DC5521, DC7909, and car charger cable are to adapt to different energy storage batteries, please choose different ports according to the battery you use, and only connect one of them at a time (Anderson/DC5521 /DC7909/car charger port).
MAKE YOUR OUTDOOR LIFE EASIER
The Vanpowers SP200 is foldable, compact, and lightweight at just 16 lbs., and it comes with its own carrying case, so you can take it anywhere! Once you arrive at your destination, simply take it out, unfold it, and set it up with its kickstands to get maximum sun exposure.
